Kafka
静态 IP 地址
ip addr
vi /etc/sysconfig/network-scripts/ifcfg-ens33
/etc/sysconfig/network-scripts/ifcfg-ens33
TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=static
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=ens33
UUID=5a91778c-356f-43ce-8133-f98b61745b1d
DEVICE=ens33
ONBOOT=yes
IPADDR=192.168.0.128
NETMASK=255.255.255.0
GATEWAY=192.168.0.2
DNS1=119.29.29.29
systemctl restart network.service
ip addr
Firewall
关闭防火墙
systemctl status firewalld
systemctl stop firewalld
systemctl disable firewalld
systemctl status firewalld
JDK
解压安装
cd ~
mkdir java
cd java
tar zxvf jdk-8u341-linux-x64.tar.gz
设置 PATH
cd jdk1.8.0_341
pwd
/root/java/jdk1.8.0_341
vim /etc/profile
/etc/profile
export JAVA_HOME=/root/java/jdk1.8.0_341 export PATH=$PATH:$JAVA_HOME/bin
source /etc/profile
验证
java -version
javac -version
ZooKeeper 集群
解压安装
cd ~
mkdir zookeeper
cd zookeeper
tar zxvf zookeeper-3.4.12.tar.gz
设置 PATH
cd zookeeper-3.4.12
pwd
/root/zookeeper/zookeeper-3.4.12
vim /etc/profile
/etc/profile
export ZOOKEEPER_HOME=/root/zookeeper/zookeeper-3.4.12 export PATH=$PATH:$ZOOKEEPER_HOME/bin
source /etc/profile
修改 ZooKeeper 配置
cd conf
cp zoo_sample.cfg zoo.cfg
vim zoo.cfg
zoo.cfg
# The number of milliseconds of each tick
#tickTime=2000
# The number of ticks that the initial
# synchronization phase can take
#initLimit=10
# The number of ticks that can pass between
# sending a request and getting an acknowledgement
#syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just
# example sakes.
#dataDir=/tmp/zookeeper
# the port at which the clients will connect
#clientPort=2181
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
#autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
#autopurge.purgeInterval=1
# ZooKeeper服务器心跳时间，单位为ms
tickTime=2000
# 允许follower连接并同步到leader的初始化连接时间，以tickTime的倍数来表示
initLimit=10
# leader与follower心跳检测最大容忍时间，响应超过syncLimit*tickTime，leader认为
# follower“死掉”，从服务器列表中删除follower
syncLimit=5
# 数据目录
dataDir=/tmp/zookeeper/data
# 日志目录
dataLogDir=/tmp/zookeeper/log
# ZooKeeper对外服务端口
clientPort=2181
server.0=192.168.0.128:2888:3888
server.1=192.168.0.129:2888:3888
server.2=192.168.0.130:2888:3888
mkdir -p /tmp/zookeeper/data
mkdir -p /tmp/zookeeper/log
cd /tmp/zookeeper/data
vim myid
myid：服务器的编号
0
启动 ZooKeeper 服务
zkServer.sh start
zkServer.sh status
停止 ZooKeeper 服务
zkServer.sh stop
Kafka 集群
解压安装
cd ~
mkdir kafka
cd kafka
tar zxvf kafka_2.11-2.0.0.tgz
设置 PATH
cd kafka_2.11-2.0.0
pwd
/root/kafka/kafka_2.11-2.0.0
vim /etc/profile
/etc/profile
export KAFKA_HOME=/root/kafka/kafka_2.11-2.0.0 export PATH=$PATH:$KAFKA_HOME/bin
source /etc/profile
修改 Kafka 配置
cd config
vim server.properties
server.properties
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# see kafka.server.KafkaConfig for additional details and defaults
############################# Server Basics #############################
# The id of the broker. This must be set to a unique integer for each broker.
broker.id=0
############################# Socket Server Settings #############################
# The address the socket server listens on. It will get the value returned from
# java.net.InetAddress.getCanonicalHostName() if not configured.
# FORMAT:
# listeners = listener_name://host_name:port
# EXAMPLE:
# listeners = PLAINTEXT://your.host.name:9092
listeners=PLAINTEXT://192.168.0.128:9092
# Hostname and port the broker will advertise to producers and consumers. If not set,
# it uses the value for "listeners" if configured. Otherwise, it will use the value
# returned from java.net.InetAddress.getCanonicalHostName().
#advertised.listeners=PLAINTEXT://your.host.name:9092
# Maps listener names to security protocols, the default is for them to be the same. See the config documentation for more details
#listener.security.protocol.map=PLAINTEXT:PLAINTEXT,SSL:SSL,SASL_PLAINTEXT:SASL_PLAINTEXT,SASL_SSL:SASL_SSL
# The number of threads that the server uses for receiving requests from the network and sending responses to the network
num.network.threads=3
# The number of threads that the server uses for processing requests, which may include disk I/O
num.io.threads=8
# The send buffer (SO_SNDBUF) used by the socket server
socket.send.buffer.bytes=102400
# The receive buffer (SO_RCVBUF) used by the socket server
socket.receive.buffer.bytes=102400
# The maximum size of a request that the socket server will accept (protection against OOM)
socket.request.max.bytes=104857600
############################# Log Basics #############################
# A comma separated list of directories under which to store log files
log.dirs=/tmp/kafka-logs
# The default number of log partitions per topic. More partitions allow greater
# parallelism for consumption, but this will also result in more files across
# the brokers.
num.partitions=1
# The number of threads per data directory to be used for log recovery at startup and flushing at shutdown.
# This value is recommended to be increased for installations with data dirs located in RAID array.
num.recovery.threads.per.data.dir=1
############################# Internal Topic Settings #############################
# The replication factor for the group metadata internal topics "__consumer_offsets" and "__transaction_state"
# For anything other than development testing, a value greater than 1 is recommended for to ensure availability such as 3.
offsets.topic.replication.factor=1
transaction.state.log.replication.factor=1
transaction.state.log.min.isr=1
############################# Log Flush Policy #############################
# Messages are immediately written to the filesystem but by default we only fsync() to sync
# the OS cache lazily. The following configurations control the flush of data to disk.
# There are a few important trade-offs here:
# 1. Durability: Unflushed data may be lost if you are not using replication.
# 2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush.
# 3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to excessive seeks.
# The settings below allow one to configure the flush policy to flush data after a period of time or
# every N messages (or both). This can be done globally and overridden on a per-topic basis.
# The number of messages to accept before forcing a flush of data to disk
#log.flush.interval.messages=10000
# The maximum amount of time a message can sit in a log before we force a flush
#log.flush.interval.ms=1000
############################# Log Retention Policy #############################
# The following configurations control the disposal of log segments. The policy can
# be set to delete segments after a period of time, or after a given size has accumulated.
# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens
# from the end of the log.
# The minimum age of a log file to be eligible for deletion due to age
log.retention.hours=168
# A size-based retention policy for logs. Segments are pruned from the log unless the remaining
# segments drop below log.retention.bytes. Functions independently of log.retention.hours.
#log.retention.bytes=1073741824
# The maximum size of a log segment file. When this size is reached a new log segment will be created.
log.segment.bytes=1073741824
# The interval at which log segments are checked to see if they can be deleted according
# to the retention policies
log.retention.check.interval.ms=300000
############################# Zookeeper #############################
# Zookeeper connection string (see zookeeper docs for details).
# This is a comma separated host:port pairs, each corresponding to a zk
# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002".
# You can also append an optional chroot string to the urls to specify the
# root directory for all kafka znodes.
zookeeper.connect=192.168.0.128:2181,192.168.0.129:2181,192.168.0.130:2181/kafka
# Timeout in ms for connecting to zookeeper
zookeeper.connection.timeout.ms=6000
############################# Group Coordinator Settings #############################
# The following configuration specifies the time, in milliseconds, that the GroupCoordinator will delay the initial consumer rebalance.
# The rebalance will be further delayed by the value of group.initial.rebalance.delay.ms as new members join the group, up to a maximum of max.poll.interval.ms.
# The default value for this is 3 seconds.
# We override this to 0 here as it makes for a better out-of-the-box experience for development and testing.
# However, in production environments the default value of 3 seconds is more suitable as this will help to avoid unnecessary, and potentially expensive, rebalances during application startup.
group.initial.rebalance.delay.ms=0
启动 Kafka 服务
cd /root/kafka/kafka_2.11-2.0.0
- 前台方式启动 Kafka broker 进程
bin/kafka-server-start.sh config/server.properties
- 后台方式启动 Kafka broker 进程
bin/kafka-server-start.sh -daemon config/server.properties
jps 命令查看 Kafka 服务进程是否已经启动
jps -l
验证部署
测试 topic 创建与删除
创建主题
bin/kafka-topics.sh --zookeeper 192.168.0.130:2181/kafka --create --topic topic-demo --partitions 3 --replication-factor 3
列出所有可用的主题
bin/kafka-topics.sh --zookeeper 192.168.0.130:2181/kafka --list
查看主题的详细信息
bin/kafka-topics.sh --zookeeper 192.168.0.130:2181/kafka --describe --topic topic-demo
删除主题
bin/kafka-topics.sh --zookeeper 192.168.0.130:2181/kafka --delete --topic topic-demo
测试消息发送与消费
使用 kafka-console-consumer.sh 脚本订阅主题 topic-demo
bin/kafka-console-consumer.sh --bootstrap-server 192.168.0.130:9092 --topic topic-demo
kafka-console-producer 发送消息
使用 kafka-console-producer.sh 脚本发送一条消息「Hello, Kafka!」至主题 topic-demo
bin/kafka-console-producer.sh --broker-list 192.168.0.130:9092 --topic topic-demo
>Hello, Kafka!
>
kafka-console-consumer 接收消息
bin/kafka-console-consumer.sh --bootstrap-server 192.168.0.130:9092 --topic topic-demo
Hello, Kafka!
停止 Kafka 服务
- 前台方式启动 Kafka broker 进程时
Ctrl + C
- 后台方式启动 Kafka broker 进程时
优雅关闭
bin/kafka-server-stop.sh